MOXA TCC-80-DB9 Port-powered RS-232 to RS-422/485 converter with 15 KV serial ESD protection

MOXA TCC-80-DB9 Port-powered RS-232 to RS-422/485 converter with 15 KV serial ESD protection

MOXA TCC-80-DB9 Port-powered RS-232 to RS-422/485 converter with 15 KV serial ESD protection, DB9 male connector on the RS-422/485 side, and 2.5 KV optical isolation

MOXA TCC-80-DB9 Port-powered RS-232 to RS-422/485 converter with 15 KV serial ESD protection

AED 470.00 Excluding VAT

In stock

AED 470.00 Excluding VAT

  • External power source supported but not required
  • Compact size
  • Converts RS-422, and both 2-wire and 4-wire RS-485
  • RS-485 automatic data direction control
  • Automatic baud-rate detection
  • 15 KV serial ESD protection
  • Built-in 120-ohm termination resistors
  • 2.5 KV isolation (for TCC-80I only)
  • LED port power indicator.
  • Weight : 50 g (0.11 Ib.)
Availability: Only 4 left in stock SKU: TCC-80-DB9 Categories: , Tag:
Compare

Description

MOXA TCC-80-DB9 Port-powered RS-232 to RS-422/485 converter with 15 KV serial ESD protection

Introduction

The TCC-80-DB9/80I provides complete signal conversion between RS-232 and RS-422/485, without requiring an external power source. It supports both half duplex 2-wire RS-485 and full duplex 4-wire RS-422/485, either of which can be converted between RS-232’s T x D and R x D lines. In addition, the TCC-80/80I’s 15 KV ESD protection guards against damage from electrostatic discharge. The TCC-80I is the world’s first high-speed, port-powered converter with 2.5 KV isolation.

Automatic data direction control is also provided for RS-485, in which the RS-485 driver is enabled automatically when the circuitry senses the T x D output from the RS-232 signal. This means that no programming effort is required to control the transmission direction of the RS-485 signal. Moreover, the TCC-80I patented LED port power indicator can let you check if TCC-80I is receiving enough power or not.


MOXA TCC-80-DB9 Port-powered RS-232 to RS-422/485 converter with 15 KV serial ESD protection, DB9 male connector on the RS-422/485 side, and 2.5 KV optical isolation
MOXA TCC-80-DB9 Port-powered RS-232 to RS-422/485 converter with 15 KV serial ESD protection, DB9 male connector on the RS-422/485 side, and 2.5 KV optical isolation

 


Features

External power source supported but not required
Compact size
Converts RS-422, and both 2-wire and 4-wire RS-485
RS-485 automatic data direction control
Automatic baud-rate detection
15 KV serial ESD protection
Built-in 120-ohm termination resistors
2.5 KV isolation (for TCC-80I only)
LED port power indicator

Serial Interface/ TCC-80-DB9

Connector : DB9 male
No. of Ports : 2

Serial standards  : RS-232/422/485

RS-485 Data Direction Control : ADDC (automatic data direction control)
Terminator for RS-485  : N/A, 120 ohms, 120 kilo-ohms
Baud-rate : 300 bps to 115.2 kbps

Serial Signals

RS-422 : Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w : Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w  : Data+, Data-, GND
RS-232  : T x D, R x D, GND

Power Parameters/ TCC-80-DB9

Input Current : 30 mA @ 5 to 12 VDC
Input Voltage : 5 to 12 VDC
No. of Power Inputs : 1
Overload Current Protection : Supported
Source of Input Power : Power input jack

Physical Characteristics

Housing : Plastic top cover, metal bottom plate
IP Rating : IP30
Dimensions:42 x 91 x 23.6 mm (1.65 x 3.58 x 0.93 in)
Weight  : 50 g (0.11 lb.)
Installation  : Desktop

Environmental Limits/ TCC-80-DB9

Operating Temperature : 0 to 60°C (32 to 140°F)
Storage Temperature (package included) : -20 to 75°C (-4 to 167°F)
Ambient Relative Humidity : 5 to 95% (non-condensing)

Warranty

Warranty Period : 5 years.

Additional information

Brand

Moxa

Product ID

TCC-80-DB9

No. of Ports

2

Connector

DB9 Male

Serial Standards

RS-232/422/485

Input Current

30 mA @ 5 to 12 VDC

Dimension

42 x 91 x 23.6 mm (1.65 x 3.58 x 0.93 in)

Warranty

5 Years.

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.