Moxa ioLogik E1212 Remote Ethernet I/O, 8DI/8DIO, 2-port Switch

Moxa ioLogik E1212 Remote Ethernet I/O, 8DI/8DIO, 2-port Switch

Moxa ioLogik E1212 Remote Ethernet I/O, 8DI/8DIO, 2-port Switch

AED1,050.00 Excl. VAT.

Out of stock

AED1,050.00 Excl. VAT.

Features and Benefits

  • User-definable Modbus TCP Slave addressing
  • Supports RESTful API for IIoT applications
  • Supports Ethernet/IP Adapter
  • 2-port Ethernet switch for daisy-chain topologies
  • Saves time and wiring costs with peer-to-peer communications
  • Active communication with MX-AOPC UA Server
  • Supports SNMP v1/V2c
  • Easy mass deployment and configuration with Io Search utility
  • Friendly configuration via web browser
  • Simplifies I/O management with MXIO library for Windows or Linux
  • Class I Division 2, ATEX Zone 2 certification
  • Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments.
Availability: Out of stock SKU: ioLogik E1212 Categories: , Tag:
Compare Compare

Description

Moxa ioLogik E1212 Remote Ethernet I/O, 8DI/8DIO, 2-port Switch

Introduction

The ioLogik E1200 Series (ioLogik E1212) supports the most often-used protocols for retrieving I/O data, making it capable of handling a wide variety of applications. Most IT engineers use SNMP or RESTful API protocols, but OT engineers are more familiar with OT-based protocols, such as Modbus and Ethernet/IP. Moxa’s Smart I/O makes it possible for both IT and OT engineers to conveniently retrieve data from the same I/O device. The ioLogik E1200 Series speaks six different protocols, including Modbus TCP, Ethernet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and Moxa MXIO library for IT engineers. The ioLogik E1200 retrieves I/O data and converts the data to any of these protocols at the same time, allowing you to get your applications connected easily and effortlessly.


Moxa ioLogik E1212 Remote Ethernet I/O, 8DI/8DIO, 2-port Switch

 


Input/Output Interface

Digital Input Channels : 8
Configurable DIO Channels (by jumper) : 8
Isolation : 3k VDC or 2k Vrms
Buttons : Reset button

Digital Inputs

Connector : Screw-fastened Euro-block terminal
Sensor Type : Dry contact, Wet contact (NPN or PNP)
I/O Mode : DI or event counter
Dry Contact: On: short to GND, Off: open
Wet Contact (DI to COM) : On: 10 to 30 VDC, Off: 0 to 3 VDC
Counter Frequency : 250 Hz
Digital Filtering Time Interval : Software configurable
Points per COM : 8 channels

Digital Outputs/ ioLogik E1212

Connector : Screw-fastened Euro-block terminal
I/O Type : Sink
I/O Mode : DO or pulse output
Current Rating : 200 mA per channel
Pulse Output Frequency : 500 Hz (max.)
Over-Current Protection : 2.6 A per channel @ 25°C
Over-Temperature Shutdown : 175°C (typical), 150°C (min.)
Over-Voltage Protection : 35 VDC

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector) : 2, 1 MAC address (Ethernet bypass)
Magnetic Isolation Protection : 1.5 kV (built-in)

Ethernet Software Features

Configuration Options : Web Console (HTTP), Windows Utility (Io Search), MCC Tool
Industrial Protocols : Modbus TCP Server (Slave), Moxa AOPC (Active Tag), MXIO Library, Ethernet/IP Adapter
Management : RESTful API, SNMPv1/v2c, SNMPv1 Trap, HTTP, DHCP Client, BOOTP, IPv4, TCP/IP, UDP
MIB : Device Settings MIB
Security : Access control list

Security Functions/ ioLogik E1212

Authentication : Local database

LED Interface

LED Indicators : Power, Ready, Port 1, Port 2

Modbus TCP

Functions Supported : 1, 2, 3, 4, 5, 6, 15, 16, 23
Mode : Server (Slave)
Max. No. of Client Connections : 10

Ethernet/IP

Mode : Adapter
Max. No. of Scanner Connections : 9 (for read-only), 1 (for read/write)

Power Parameters

Power Connector : Screw-fastened Euro-block terminal
No. of Power Inputs : 1
Input Voltage : 12 to 36 VDC
Power Consumption : 155 mA @ 24 VDC

Physical Characteristics/ ioLogik E1212

Housing : Plastic
Dimensions : 27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight : 200 g (0.44 lb.)
Installation : DIN-rail mounting, Wall mounting
Wiring : I/O cable, 16 to 26 AWG, Power cable, 12 to 24 AWG

Environmental Limits

Operating Temperature : -10 to 60°C (14 to 140°F)
Storage Temperature (package included) : -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity : 5 to 95% (non-condensing)
Altitude : 4000 m

Declaration

Green Product : RoHS, CRoHS, WEEE

MTBF

Time : 561,930 hrs.
Standards : Telcordia SR332

Warranty

Warranty Period : 5 Years.

Additional information

Brand

MOXA

Product ID

ioLogik E1212

Connector

Screw-fastened Euro-block terminals

Magnetic isolation protection

1.5 kV (built-in)

Mode

Adapter

Hosing

Plastic

Dimensions

27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)

Weight

200 g (0.44 Ib.)

Altitude

4000 m

Warranty

5 Years

Reviews

There are no reviews yet.


Be the first to review “Moxa ioLogik E1212 Remote Ethernet I/O, 8DI/8DIO, 2-port Switch”