Moxa TCF-142-S-ST RS-232/422/485 to Fiber Optic Converter
AED 1,380.00 Excluding VAT
Features and Benefits
- Ring and point-to-point transmission
- Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF-142-S) or 5 km with multi-mode (TCF-142-M)
- Decreases signal interference
- Protects against electrical interference and chemical corrosion
- Supports baud-rates up to 921.6 kbps
- Wide-temperature models available for -40 to 75°C environments
- Description
- Additional information
- Reviews (0)
Description
Moxa TCF-142-S-ST RS-232/422/485 to Fiber Optic Converter
Introduction
The TCF-142-S-ST media converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 converters can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.
Serial Interface
No. of Ports : 2
Serial Standards : RS-232/RS-422/RS-485
Baud-rate : 50 bps to 921.6 kbps (supports non-standard baud-rates)
Flow Control : ADDC (automatic data direction control) for RS-485
Pull High/Low Resistor for RS-485 : 1 kilo-ohm, 150 kilo-ohms
RS-485 Data Direction Control : ADDC (automatic data direction control)
Terminator for RS-485 : N/A, 120 ohms, 120 kilo-ohms
Connector : Single-mode ST connector
Latency : 300 ns
Serial Signals/ TCF-142-S-ST
RS-232 : T x D, R x D, GND
RS-422 : Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w : Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w : Data+, Data-, GND
Power Parameters
No. of Power Inputs : 1
Input Current : 70 to 140 mA @ 12 to 48 VDC
Input Voltage : 12 to 48 VDC
Overload Current Protection : Supported
Power Connector : Terminal block
Power Consumption : 70 to 140 mA @ 12 to 48 VDC
Reverse Polarity Protection : Supported
Physical Characteristics
IP Rating : IP30
Housing : Metal
Dimensions (with ears) : 90 x 100 x 22 mm (3.54 x 3.94 x 0.87 in)
Dimensions (without ears) : 67 x 100 x 22 mm (2.64 x 3.94 x 0.87 in)
Weight : 320 g (0.71 lb.)
Installation : Wall mounting
Environmental Limits/ TCF-142-S-ST
Operating Temperature : -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) : -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity : 5 to 95% (non-condensing)
MTBF
Time : 780,480 Hrs.
Standards : Telcordia (Bell-core),GB
Warranty
Warranty period : 5 years.
Additional information
| Brand | MOXA |
|---|---|
| Product ID | TCF-142-S-ST |
| No. of ports | 2 |
| Serial Standards | RS-232/422/485 |
| Baud-rate | 50 bps to 921.6 kbps ( support non-standard baud-rate) |
| Flow control | ADDC (automatic data direction control) for RS-485 |
| Connector | Single-mode ST connector |
| Housing | Metal |
| IPRating | IP30 |
| Dimension (with ears) | 90 x 100 x 22 mm (3.54 x 3.94 x 0.87 in) |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.