MOXA ICF-1170I-M-ST Industrial CAN bus to Fiber Optic Converter

Description

MOXA ICF-1170I-M-ST Industrial CAN bus to Fiber Optic Converter

Introduction

The ICF-1170I-M-ST Series CAN-to-fiber converters are used to convert CAN signals from copper to optical fiber. The converters come with 2 kV optical isolation for the CAN bus system and dual power inputs with alarm contact relay to ensure that your CAN bus system will remain online.

Fiber Test Mode

Fiber Test Mode can be used to test the fiber cable between two ICF-1170I units, and it provides a simple way to determine if the fiber cable is transmitting data correctly. When in Fiber Test Mode, the fiber transceiver (Tx) will continuously send out a data signal and the Fiber Tx LED will light up. On the other side of the connection, when the ICF-1170I fiber transceiver (Rx) receives the data signal from the Tx side, the Fiber Rx LED will light up.

---

---

Features and Benefits

Transmits data up to 2 km over optical fiber
Converts CAN signals to fiber and fiber to CAN signals
Baudrate up to 1 Mbps
Dual power inputs for redundancy
DIP switch for 120 ohm terminal resistance
DIP switch for fiber test mode
LEDs for Fiber Tx, Fiber Rx, Power 1, Power 2
Wide-temperature model available for -40 to 85°C environments
Fully compatible with the ISO 11898 standard

Serial Interface

Optical Fiber : 100BaseFX ports (multi-mode ST connector)

CAN Interface/ ICF-1170I-M-ST

Isolation  : 2 kV (built-in)
No. of Ports  : 1
Signals : CAN_L, CAN_H, CAN Signal GND
Terminator  : N/A, 120 ohms (by DIP)

Power Parameters

Input Current  : 221 mA @ 12 to 48 VDC
Power Consumption  : 221 mA @ 12 to 48 VDC
Input Voltage  : 12 to 48 VDC
No. of Power Inputs  : 2
Overload Current Protection : Supported
Power Connector  : Terminal block (for DC models)

Physical Characteristics/ ICF-1170I-M-ST

Housing  : Metal
IP Rating  : IP30
Dimensions : 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)
Weight : 178 g (0.39 lb.)
Installation : DIN-rail mounting

Environmental Limits

Operating Temperature  : 0 to 60°C (32 to 140°F)
Storage Temperature (package included) : -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity : 5 to 95% (non-condensing)

Warranty

Warranty Period  : 5 years.

---

 

Additional information

Brand	MOXA
Product ID	ICF-1170I-M-ST
Isolation	2 kV (Built-in)
No. of Ports	1
Input Current	221 mA @ 12 to 48 VDC
Housing	Metal
Dimension	30.3 x 70 x 155 mm (1.19 x 2.76 x 4.53 in)
Warranty	5 Years.