Moxa Mgate MB3170 1 Port advanced Modbus gateway, 0 to 60°C operating temperature
AED 1,195.00 Excluding VAT
Supports Auto Device Routing for easy configuration
Supports route by TCP port or IP address for flexible deployment
Connects up to 32 Modbus TCP servers
Connects up to 31 or 62 Modbus RTU/ASCII slaves
Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master)
Supports Modbus serial master to Modbus serial slave communications
Built-in Ethernet cascading for easy wiring
10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC/ST connector)
Emergency request tunnels ensure QoS control
Embedded Modbus traffic monitoring for easy troubleshooting
Serial port with 2 kV isolation protection (for “-I” models)
-40 to 75°C wide operating temperature models available
Supports redundant dual DC power inputs and 1 relay output
- Description
- Additional information
- Reviews (0)
Description
Moxa Mgate MB3170
Buy Moxa Mgate MB3170 1 Port advanced Modbus gateway, 0 to 60°C operating temperature
Introduction
The MGate MB3170 and MB3270 are 1 and 2-port Modbus gateways, respectively, that convert between Modbus TCP, ASCII, and RTU communications protocols. The gateways provide both serial-to-Ethernet communication and serial (master) to serial (slave) communications. In addition, the gateways support simultaneously connecting serial and Ethernet masters with serial Modbus devices. The MGate MB3170 and MB3270 Series gateways can be accessed by up to 32 TCP master/clients or connect to up to 32 TCP slave/servers. Routing through the serial ports can be controlled by IP address, TCP port number, or ID mapping. Serial-port routing by TCP port and IP address allows access for up to 4 TCP clients/masters (MB3270 models), while routing by ID mapping allows access for up to 32 TCP clients/masters (MB3170/MB3270). A featured priority control function allows urgent commands to obtain an immediate response.
Optical Fiber for Ethernet Communication
The MGate MB3170 Series includes 100BaseFX fiber models that support transmission distances up to 4 km for multi-mode models, and up to 40 km for single-mode models. Optical fiber is well-suited for industrial applications because it is immune to electromagnetic noise and interference. For environments that experience high ground loop voltages, fiber provides the best isolation protection, and because there is no danger of sparking, optical fiber is safer than copper wire to use in hazardous environments.
Features
- Supports Auto Device Routing for easy configuration
- Supports route by TCP port or IP address for flexible deployment
- Connects up to 32 Modbus TCP servers
- Connects up to 31 or 62 Modbus RTU/ASCII slaves
- Accessed by up to 32 Modbus TCP clients (retains 32 Modbus requests for each Master)
- Supports Modbus serial master to Modbus serial slave communications
- Built-in Ethernet cascading for easy wiring
- 10/100BaseTX (RJ45) or 100BaseFX (single mode or multi-mode with SC/ST connector)
- Emergency request tunnels ensure QoS control
- Embedded Modbus traffic monitoring for easy troubleshooting
- Serial port with 2 kV isolation protection (for “-I” models)
- -40 to 75°C wide operating temperature models available
- Supports redundant dual DC power inputs and 1 relay output
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector) : 2 (1 IP, Ethernet cascade), Auto MDI/MDI-X connection
Magnetic Isolation Protection : 1.5 kV (built-in)
Ethernet Software Features
- Industrial Protocols : Modbus TCP Client (Master), Modbus TCP Server (Slave)
- Configuration Options : Web Console (HTTP/HTTPS), Device Search Utility (DSU)
- MGate Manager, MCC Tool, Telnet Console
Serial Interface
- No. of Ports : 1
- Connector : DB9 male for RS-232 and terminal block for RS-422/485
- Serial Standards : RS-232/422/485 (software selectable)
- Baudrate : 50 bps to 921.6 kbps
- Flow Control : DTR/DSR, RTS Toggle (RS-232 only), RTS/CTS
- Pull High/Low Resistor for RS-485 : 1 kilo-ohm, 150 kilo-ohms
- Terminator for RS-485 : 120 ohms
- RS-485 Data Direction Control : ADDC (automatic data direction control)
Serial Signals
- RS-232 : T x D, R x D, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 : Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w : Data+, Data-, GND
- RS-485-4w : Tx+, Tx-, Rx+, Rx-, GND
Modbus (Transparent)
- Max. No. of Client Connections : 32
- Max. No. of Server Connections : 32
Power Parameters
- Input Voltage : 12 to 48 VDC
- Input Current : 435 mA @ 12 VDC
- Power Connector : 7-pin terminal block
- Contact Current Rating : Resistive load: 1 A @ 30 VDC
Physical Characteristics
- Housing : Plastic
- IP Rating : IP30
- Dimensions (with ears) : 29 x 89.2 x 124.5 mm (1.14 x 3.51 x 4.90 in)
- Dimensions (without ears) : 29 x 89.2 x 118.5 mm (1.14 x 3.51 x 4.67 in)
- Weight : 360 g (0.79 lb.)
Environmental Limits
- Operating Temperature : 0 to 60°C (32 to 140°F)
- Storage Temperature (package included) : -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity : 5 to 95% (non-condensing)
Additional information
Brand | Moxa |
---|---|
Connector | DB9 male for RS-232 and terminal block for RS-422/485 |
Serial Standards | RS-232/422/485 |
Warranty | 5 Year Warranty |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.