Moxa TCF-142-S-SC RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and SC connector, 0 to 60°C operating temperature

Moxa TCF-142-S-SC RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and SC connector, 0 to 60°C operating temperature

TCF-142-S-SC RS-232/422/485 to fiber converters

Moxa TCF-142-S-SC RS-232/422/485 to single-mode optical fiber media converter with fiber ring support and SC connector, 0 to 60°C operating temperature

AED 1,175.00 Excluding VAT

Out of stock

AED 1,175.00 Excluding VAT

icon-check Ring and point-to-point transmission

icon-check Extends RS-232/422/485 transmission up to 40km with single-mode (TCF-142-S) or 5km with multi-mode (TCF-142-M)

icon-check Decreases signal interference

icon-check Protects against electrical and chemical corrosion

icon-check Supports baud-rates up to 921.6 kbps

icon-check Wide-temperature models available for -40 to 75°C environments.

Availability: Out of stock SKU: MOXA-TCF-142-S-SC Categories: , Tag:
Compare

Description

Moxa TCF-142-S-SC RS-232/422/485 to fiber converters

The Moxa TCF-142-S-SC RS-232/422/485 to fiber converters are equipped with a multiple interface circuit that can handle RS-232 or RS-422/485 serial interfaces and multi-mode or single-mode fiber. TCF-142 converters are used to extend serial transmission up to 5 km (TCF-142-M with multi-mode fiber) or up to 40 km (TCF-142-S with single-mode fiber). The TCF-142 converters can be configured to convert either RS-232 signals, or RS-422/485 signals, but not both at the same time.


Moxa TCF-142-S-SC RS-232/422/485 to single-mode optical fiber media converter

Features

  • Ring and point-to-point transmission
  • Extends RS-232/422/485 transmission up to 40 km with single-mode (TCF-142-S) or 5 km with multi-mode (TCF-142-M)
  • Decreases signal interference
  • Protects against electrical interference and chemical corrosion
  • Supports baudrates up to 921.6 kbps
  • Wide-temperature models available for -40 to 75°C environments

Specifications

Serial Interface

No. of Ports

Serial Standards

Baud-rate

Flow Control

Pull High/Low Resistor RS-485

RS-485 Data Direction Control

Terminal for RS-485

Connector

Latency

2

RS-232/422/485

50 bps to 921.6 kbps (supports non-standard baud-rate)

ADDC (automatic data direction control) for RS-485

1 kilo-ohm, 150 kilo-ohms

ADDC (automatic data direction control)

N/A, 120 ohms, 120 kilo-ohms

Single-mode SC connector

300 ns

Serial Signals

RS-232

RS-422

RS-485-4w

RS-485-2w

T x D, R x D, GND

Tx+, Tx-, Rx+, Rx-, GND

Tx+, Tx-, Rx+, Rx-, GND

Data+, Data-, GND

Power Parameters

No. of Power Inputs

Input Current

Input Voltage

Overload Current Protection

Power Connector

Power Consumption

Reverse Polarity Protection

1

70 to 140 mA @ 12 to 48 VDC

12 to 48 VDC

Supported

Terminal block

70 to 140 mA @ 12 to 48 VDC

Supported

Physical Characteristics

IP Rating

Housing

Dimensions (With ears)

Dimensions (Without ears)

Weight

Installation

IP 30

Metal

90 x 100 x 22 mm (3.54 x 3.94 x 0.87 in)

67 x 100 x 22 mm (2.64 x 3.94 x 0.87 in)

320 g (0.71 Ib.)

Wall Mounting

MTBF

Time

Standards

780,480 Hrs

Telcordia (Bell-core), GB

Warranty

Warranty Period

5 Years

Additional information

Brand

Moxa

Part Number

TCF-142-S-SC

Connector

Single-mode SC connector

No. of Ports

2

Warranty

5 Year Warranty

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.